Steel Frame Roll Forming Machine

Steel Frame Roll Forming Machine is specialized in LGSF (Light Gauge Steel Frame), such as roof truss, wall frame, etc, with high tensile G550 Mpa steel.

Quick Details of Light Gauge Steel Frame Roll Forming Machine

Production Capacity:	10-25m/min	Condition:	New
Dimension(L*W*H):	5.2*1.72*1.47m	Material thickness:	0.5mm- 0.9mm
Voltage:	380V, 50Hz, 3 Phase,	Power(W):	8.5kw
Weight:	5000KGS	Certification:	ISO9001, CE
After-sales Service Provided:	Engineers available to service machinery overseas	Use:	Steel Frame

Un-coiler System of Steel Frame Roll Forming Machine

It is used to support steel coil and uncoil it in a turntable way.
Passive uncoil pulled by roll forming system
Loading capacity: 3.0tons
Uncoiling width: 300mm
Inner diameter: 450-550mm

Entry Guide of Steel Frame Roll Forming Machine
Put sheet metal through the guide to manufacture and process, it can guarantee products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locating angle iron.

Main Roll Forming System
Ensure stability, precision and lifetime.
Usage: In order to keep the product shape and precision, adopts welded steel structure, motor reducer drive, chain drive transmission (the first and the last roller station, down roller, should be attached to the upper one with gear drive, roller surfaces polishing, hard plating, heat treatment, and galvanization treatment. The polished surface and heat treatment towards the molds also can keep molding plate surface smooth and not easy to be marked when it is being stamped.

Length of the main part: about 5200х1720х1400
Weight of main part: 5 tons
Voltage: 380V/50HZ3Phase (as customer’s request)

Roller fixer: Guide column
Frame: middle plate welded
Memorial arch frame type
Sidewall thickness: 25mm
Drive mode: gear/chain drive

Material of rollers: GCr12MoV
Material of shafts: S45C steel with tempering
Diameter of shafts: φ65mm
Number of rollers: 10 rollers
Main power: 5.5 kw
Cyclonical planetary gear speed reducer

Hydraulic Station
It is controlled by the gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank, the pump drive the cutter machine to begin the cutting job.
Hydraulic motor Power: 3kw

Hydraulic oil: 46#
Volume: 60L
Components: The system includes a set of hydraulic tank, a set of the hydraulic oil pump, two hydraulic pipes. And two sets of electromagnetism valves.

Electric Control System

• Adopted PLC, transducer, touch panel from Siemens to ensure high speed with stability, precision and lifetime.
• Other electric elements are also Siemens
• Equipped with the movable switch, air break, radiator, transformer & electric leakage protector for operator convenience and safety.